Ssheng Metal Supply You Various Kinds of Bars and Rods In Material of Titanium Alloy,Nickel Based Alloys and Cobalt Based Alloys and other Staniless Steel Bars and Rods.

Bars & Rods Available Forms: Round Bar, Flat /Square Bar, Rectangular Bar, Hexagon Bar, Hollow Bar

Manufacture Process: VIR(Vacuum Induction Melting) -VAR(Vacuum Arc Remelting)-ESR(Electroslag)-Forging/Hot rolling rod -Semifinished -Finishe

Bars & Rods Delivery Condition:

→Annealed/Solution Annealed.→Hardened & Tempered.(By Clients Requirements)

→Strain Hardened.

→Centerless Ground & Polished.(ForDia≤30mm )

→Cold Drawn & Hot Rolling  (For Dia≤30mm Bars & Rods)

→SmoothTurned & Polished. (By Clients requirments)

→Forged & Rough Turned( For Dia≥30mm )

→Buffed (Mirror finish).

→100% Ultrasonically Tested (For all our Bar & Rods Before heat treatment)

Surface Condition: Black Bar, Machining Polished/Bright Bar,Pickling Bar

Out Diameter Size: 6mm-500mm

Specification/Standards: ASTM, ASME, GB, JIS, GOST, DIN, etc.

Forged Rough Turned
Shape	Size Range (mm)	Size Range (inch)
Round	40 to 400	6 1/4 to 16
Smooth, Turned & Polished
Shape	Size Range (mm)	Size Range (inch)
Round	22 to 100	13/16 to 4
Centerless Ground & Polished
Shape	Size Range (mm)	Size Range (inch)
Round	4 to 100	5/32 to 4
Pump Shaft quality
Shape	Size Range (mm)	Size Range (inch)
Round	22 to 150	13/16 to 6
Cold Drawn Bars
Shape	Size Range (mm)	Size Range (inch)
Round	2 to 21	3/32 to 13/16
Hexagon	4 to 75	5/32 to 3
Square	4 to 45	5/32 to 3

Main Testing Terms and Procedure:

1.Heat Treatment and Solution Annealing / Bright Annealing

2.Cutting to required length and deburring;

3.Chemical Composition Analysis Test With 100% PMI and One tube from each heat by Direct Reading Spectrometer

4.Visual Test and Endoscope Test for Surface Quality Test

5.Ultrasonic Test subject to the MPS (Material Purchase Specification)

6.Mechanical Tests includes Tension Strength,Yiled Strength ,Hardness Test,and Other specified Test

7.Impact Test subject to Standard request

8.Ultrasoic measuring of Wall Thickness

Ssheng Metal Supply You Various Kinds of Pipes and Tubes,Such as Seamless Steel Tube,Welded Pipe,Capillary Tube,Heat Exchanger Tubing In Material of Titanium Alloys,Nickel Based Alloys(Inconel,Incoloy,Hastelloy,Nimoinc,Ect) and Cobalt Based Alloys and other Staniless Steel Pipes and Tubes.

Pipes Available Forms: U-Bend Tube,Cut Lenght Tube

Pipes Manufacture Process: VIR(Vacuum Induction Melting) -VAR(Vacuum Arc Remelting)-ESR(Electroslag)-Forging/Hot rolling rod -Inspection-Peeling-Cut-Centering-Heating-Perforation-Inspection- Pickling/Polishing-Cold Rolling/Drawing-Straightening-Cutting-Pickling/Passivating Bright Annealing-Compostion inspectiong- Marking- Packing-Shipping

Surface Condition:Polished/Bright Pipe,Pickling Pipe

Out Diameter Size: 6mm-600mm

Wall Thickness:0.1mm-50mmm

Specification/Standards: ASTM, ASME, GB, JIS, GOST, DIN, etc.

Main Testing Terms and Procedure:

Heat Treatment and Solution Annealing / Bright Annealing

Cutting to required length and deburring;

Chemical Composition Analysis Test With 100% PMI and One tube from each heat by Direct Reading Spectrometer

Visual Test and Endoscope Test for Surface Quality Test

100% Hydrostatic Test and 100% Eddy Current Test

Ultrasonic Test subject to the MPS (Material Purchase Specification)

Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test

Impact Test subject to Standard request

Grain Size Test and Intergranular Corrosion Test

Ultrasoic measuring of Wall Thickness

Our Crrenty Sheet and Plate Material Types

Nickeld Based Alloys	Inconel: Alloy 718,Alloy 625,Alloy 600,Alloy601,Alloy 725,Alloy X750,Alloy 690,Alloy 617,Alloy 713C Incoloy: Alloy 825,Alloy 800,Alloy 800H/HT, Alloy A286,Alloy 20,Alloy 925,Alloy 925. Hastelloy : Hastelloy B,Hastelloy C,Hastelloy C22,Hastelloy C-4,Hastelloy G30,Hastelloy X, Hastelloy C276. Monel :Monel 400,Monel K500. Soft Mangtic Alloys: Permalloy Alloy,1J85,1J79 Precision Alloy:Invar 36,Super Invar,Kovar Alloy. Nimonic Alloy: Nimonic 80A,Nicmonic 75,Nimonic 90. Alloy 904L
Cobalt Based Alloys	Haynes 188,Alloy L605,UmCo 50,Refractaloy 26
Other Stainless Steel	Nitronic 60,Nitronic 50,17-4PH,

 

Ssheng Metal Supply You Various Kinds of Strips and Taps/ Foil In Material of Nickel Based Alloys and Cobalt Based Alloys,Titanium Alloys and other Staniless Steel Strip and Tapes

Strips Available Forms: Strip/Tapes,Foil

Manufacture Process: VIR(Vacuum Induction Melting) -VAR(Vacuum Arc Remelting)-ESR(Electroslag)-Forging/Hot rolling rod -Semifinished -Finished

Delivery Condition: Solution Annealed, Aged

Surface Condition: Polished/Bright Strips

Dimentions: Width 6mm-600mm, Thickness:0.1mm-8.0mmm

Specification/Standards: ASTM, ASME, GB, JIS, GOST, DIN, etc.

Main Testing Terms and Procedure:

1.Heat Treatment and Solution Annealing / Bright Annealing

2.Cutting to required length and deburring;

3.Chemical Composition Analysis Test With 100% PMI and One tube from each heat   by Direct Reading Spectrometer

4.Visual Test and Endoscope Test for Surface Quality Test

5.Ultrasonic Test subject to the MPS (Material Purchase Specification)

6.Mechanical Tests includes Tension Strength,Yiled Strength ,Hardness Test,and Other specified Test

7.Impact Test subject to Standard request

8.Ultrasoic measuring of Wall Thickness

Our Crrenty Strips and Tapes Material Types

Nickeld Based Alloys	Inconel: Alloy 718,Alloy 625,Alloy 600,Alloy601,Alloy 725,Alloy X750,Alloy 690,Alloy 617,Alloy 713C Incoloy: Alloy 825,Alloy 800,Alloy 800H/HT, Alloy A286,Alloy 20,Alloy 925,Alloy 925. Hastelloy : Hastelloy B,Hastelloy C,Hastelloy C22,Hastelloy C-4,Hastelloy G30,Hastelloy X, Hastelloy C276. Monel :Monel 400,Monel K500. Soft Mangtic Alloys: Permalloy Alloy,1J85,1J79 Precision Alloy:Invar 36,Super Invar,Kovar Alloy. Nimonic Alloy: Nimonic 80A,Nicmonic 75,Nimonic 90. Alloy 904L
Cobalt Based Alloys	Haynes 188,Alloy L605,UmCo 50,Refractaloy 26
Other Stainless Steel	Nitronic 60,Nitronic 50,17-4PH,